Bin Release
Bumper
Handle
RCON
Cliff Sensors
Contact Points for Home Base
Left Side Wheel Module
Removable Caster Wheel
Spinning Side Brush
Tangle-Free AeroForce Extractors
Bottom View
Filter Door Release Tab
Filter Door
Filter
Sensor Ports
Dust Bin
Anti-Tangle
CLEAN/Power Button
Dirt Detect
Dock Button
Spot Clean
Troubleshooting Light
Roomba 800 Interface

List of Roomba Terminology:

  • Bin Release:
    Press down firmly and pull to remove the bin.
  • Bumper:
    The soft-touch bumper cushions the contact between Roomba and your furniture.
  • Handle:
    A recessed carrying handle for easy one-handed transport room-to-room or between floors.
  • RCON:
    Roomba uses the RCON to sense the presence of Virtual Walls, Lighthouses, and dock and embark on specific behaviors.
  • Cliff Sensors:
    To ensure mobility be sure to wipe clean Roomba's cliff sensors weekly.
  • Contact Points for Home Base:
    Roomba uses its contact points to deliver charge to its battery. Be sure to wipe clean the contact points weekly.
  • Left Side Wheel Module:
    If mobility is impared lift and inspect Roomba's wheel modules for debris or entanglements.
  • Removable Caster Wheel:
    Clean Roomba's caster wheel weekly.
  • Spinning Side Brush:
    Cleans along wall edges and into corners. Easy to remove with a simple coin or similar household item.
  • Tangle-Free AeroForce Extractors:
    Dual counter-rotating extractors incorporate durable rubber treads that grab dirt and debris from any floor type.
  • Filter Door Release Tab:
    Ensure the release tab is closed flush.
  • Filter Door:
    Push in and pull up the filter door release tab.
  • Filter:
    Maintain Roomba's peformance by tapping the filter clean after each use. Replace the filter every two months.
  • Sensor Ports:
    Roomba's optical sensor ports will become clouded with frequent use. Be sure to wipe clean weekly.
  • Anti-Tangle:
    The Anti-Tangle Indicator turns on while Roomba is freeing itself from a tangle.
  • CLEAN/Power Button:
    Press CLEAN once to turn on Roomba. Press CLEAN again to start a cleaning cycle. To pause while cleaning, press CLEAN. To resume, press CLEAN. To turn off, press and hold the CLEAN button until the lights turn off.
  • Dirt Detect:
    The Dirt Detect indicator flashes when dirt is detected and Persistent Pass cleaning pattern is initiated.
  • Dock Button:
    This button will send Roomba back to the Home Base.
  • Spot Clean:
    Roomba will spiral approximately 3 feet in diameter and then spiral back to where it started.
  • Troubleshooting Light:
    The Troubleshooting Light blinks when there is an issue.

Register Your Robot

Activates the robot’s warranty and get free replacement filters. (U.S. and Canada Only)

Register Your Roomba Now

Contact iRobot

From customer service representatives to online self-support options, help is here.

Get Contact Information